SecurityMan IPCAM-SD, User Manual

Page: 46 / 147

42
DEVICE LIST
The DEVICE LIST displays all the devices (IPcam-SD) that are configurable by
the CMS and currently established connection.
VIDEO MOTION ENABLE
The VIDEO MOTION ENABLE check box enables “Motion Detection” options
for the selected camera.
NOTE: None of the motion detection options will be available (grayed out) if
the Video Motion Enable box is un-checked (disabled). When Video Motion is
enabled and an event occurs, the system will only record video footages, no
picture snapshots will be taken.
ALARM SOUND
The ALARM SOUND enables/disables the audible alert that can be heard from
your computer whenever an alarm is triggered.
SOUND FILE PATH
The SOUND FILE PATH feature allows you to specify the location (on your
computer) of the audible alert tone that you would like to be played whenever
an event is triggered. To use this feature, simply click on the BROWSE button
located to the right of the current destination description to make your
selection.
FULL CH DISPLAY
The FULL CH DISPLAY check box will allow the CMS to display the triggered
channel in a “Single Channel Full Screen” for the set time frame when motion
detection occurs.
DISPLAY TIME
The DISPLAY TIME edit box is use to specify how long (in seconds) the CMS
will display the triggered camera in “single channel full screen” mode when
motion detection occurs.