XR200-485 Appendix D
57
Common Keypad Displays
Listed below are several keypad messages you may see on the display. Follow the instructions in the Possible Solutions column to correct
the problem. In many cases, you will need to call a service person to correct the problem.
Appendix D
Message
Meaning
Possible Solutions
Invalid Area
The user has attempted a door access for an area
they are not assigned.
Assign the user acces to this area if desired; otherwise the user
cannot access the area.
Invalid Code
The user code you have entered is not recognized by
the system.
Check the user code and try again.
Invalid Level
The code you have used does not have the authority
level to access the desired option.
Check the user level to see is you have the correct level set for the
code. Remember that you can only grant a user authority if you have
the same authority or greater: You can't give what you don't have.
Invalid Profile
A user has attempted a function that is outside of the
assigned profile.
Check the user's profile settings.
Invalid Time
A user code assigned to a specific schedule has
entered outside of the valid schedule.
See Schedules and User Codes.
Enter 2nd Code
The area you are attempting to disarm or access is a
Two Man area.
A second and different user must enter a valid user code.
Closing Time
The schedule has expired but the area has not been
armed.
Users still on the premises are reminded to arm the system or extend
the schedule to a later time.
Late to Close
The system was not armed at its scheduled closing
time.
Users still on the premises are reminded to arm the system or extend
the schedule to a later time.
Failed to Exit
A user assigned the anti-pass back option has
attempted to re-enter an area which they did not exit
properly.
The user must exit the area through the proper door. If not possible,
your system administrator should select the Forgive option in the User
Codes menu option.
Summary of Contents for XR200-485
Page 1: ...User s Guide XR200 485 ...
Page 64: ...LT 0364 3 03 ...
