Security Command XR200-485 User Manual Download Page 15

Page: 15 / 64

XR200-485 Arming/Disarming

Disarming the System from the keypad

1. Press the COMMAND key until

ARM DISARM

is displayed.

During entry delay this process starts at step 3.

2. Select

DISARM

to disarm areas.

3. The keypad displays

ENTER CODE:

. Enter your user code and

press COMMAND. The keypad displays

ALL? NO YES

4. Select

YES

to disarm all areas authorized for your user code.

Select

to disarm only certain areas individually. The

keypad then displays the name of each area authorized for
your user code followed by the

NO YES

display.

Choose

YES

to disarm the area displayed.

Choose

to not disarm and to display the next area.

Note:

You can also just press the area numbers you want to

disarm while at the

ALL? NO YES

display. This changes the

display to

AREAS:

. The area numbers you select appear in the

display. For example:

AREAS: 2 4

. Press COMMAND when

done.

5. After all areas have been displayed, any alarms or communication

problems that occurred during the armed period are displayed.

6. If all areas have been disarmed, the keypad next displays

ALL

SYSTEM OFF

Extending Schedules

Depending on your system’s programming, when the schedule
expires (the ON time) you can extend the schedule to a later time.
The keypad buzzer sounds and the keypad displays “area name”
and

LATE

CLOSING TIME!

. This reminds users still on the

premises to arm the system or extend the schedule.

To extend the system’s schedule:

1. Press a Select key. The keypad will display

ENTER CODE:-

2. Enter your code and press COMMAND or present your access

card to a valid reader. The system’s schedule is automatically
extended one hour.

The keypad then displays

-: AM PM

. You can enter a time

to extend the schedule for greater than one hour. Press

Note:

If the system is not armed by the scheduled closing time,

a Late to Close report is sent to the central station. If the
schedule is extended, a Schedule Change report is sent to the
central station.

For information about extending a schedule before the scheduled
closing time has been reached, see

Extending Schedules (EXT)

the User Menu portion of this guide.

Summary of Contents for XR200-485

































































Search results

Summary of Contents for XR200-485

Reviews:

Brands by name

Popular brands

Security Command XR200-485, User Manual

Search results

Summary of Contents for XR200-485

Reviews:

Brands by name

Popular brands