manualshive.com logo in svg

Security Command XR200-485, User Manual

Share
Download
Security Command XR200-485 User Manual Download Page 23

XR200-485 User Menu

19

System Test

System Test is used to test the battery, alarm bell or siren, and
communication to a central station.  The System Test function
begins automatically as soon as you select it.

Using the System Test Function

1. Access the User Menu.
2. Press COMMAND until 

SYSTEM TEST?

 displays.

3. Press any Select key.  The system test begins automatically

and the keypad displays the following messages in this order:
1)

BELL SOUNDING

 during a two second bell test

2)

BATTERY  - OKAY 

or

 BATTERY   - TRBL

 to indicate the

condition of the battery

* 3)

TRANSMIT  TEST 

and

 ATTEMPT  NO : 1 

during the

transmit test

4)

TRANSMIT  OKAY 

or

 TRANSMIT FAILED

 to show the

results of the transmit test

5)

TEST END 

to indicate the System Test is complete.

6) You can end the transmit test by pressing the Back Arrow

key.

* The transmit test does not operate on local systems.

Testing your system’s burglary protection:

 The System Test

function should be a part of your weekly testing and should be
followed by placing the interior and perimeter burglary
devices in Zone Monitor mode.  This allows you to open and
then close each protected door and window while listening
for the keypad to beep confirming its operation.  See Zone
Monitor.

XR200-485B Panic Test

Your system may be a Model XR200-485B which includes a panic
button zone test.  See the XR200-485B User’s Guide Supplement
section in the back of this guide.

Summary of Contents for XR200-485

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands