manualshive.com logo in svg

Security Command XR200-485, User Manual

Share
Download
Security Command XR200-485 User Manual Download Page 29

XR200-485 User Menu

25

Forgive Failure to Exit

Failure to Exit is an Anti-pass back violation in which a user assigned
with anti-pass back has attempted to re-enter an area  that the
user did not exit through.

Forgive Failure to Exit removes the anti-pass back violation.  See
page 5 for more information about anti-pass back.

1. After the 

USER CODES?

 menu has been accessed and

ADD  DEL  CHG  BAT

 is displayed, press COMMAND.  The keypad

displays 

FRGV.

2. Press the top left key.  The display changes to 

USER NUMBER:-

3. At the 

USER NUMBER:- 

prompt, enter the user number to be

forgiven and press COMMAND.  The User Code Browser described
in the Appendix can help find the appropriate user by name if
you do not know the number.

4. To clear the 

FAILURE TO EXIT

 (Anti-pass back) violation for all

users enter 

000

 at the 

USER NUMBER:-

 prompt.

5. The keypad will display 

USER XXX FORGIVE

 to confirm, then

return to step 3 for the next user.  Press the Back Arrow key to
exit this menu.

Ambush Codes

Your system may be programmed to allow user number 1 to be an
Ambush code.  This Ambush code functions identically to a standard
code with the exception that it sends a silent alarm to the central
station.  This silent alarm alerts the operator to a duress situation
at the premises and prompts the immediate notification of
authorities.

Refer to the System Setup section of this guide to see if your
system is programmed for Ambush.  If so, do NOT program a code
for user number 1 unless you intend to use the Ambush function.

Summary of Contents for XR200-485

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands