manualshive.com logo in svg

Security Command XR200-485, User Manual

Share
Download
Security Command XR200-485 User Manual Download Page 51

XR200-485 Appendix B

47

SELECT ZONE . . .

COMMAND

Access the User Menu. Press
COMMAND until ZONE MONITOR?
displays. Press any SELECT key.

Press the SELECT key under NBR.

COMMAND

FRONT OFFICE

When the area where the zone is located
is displayed, press any SELECT key.

Press either of the two left SELECT keys.

Press the COMMAND key to scroll
through the list of all zone names.

EAST DOOR

When the correct zone name is
displayed, press any SELECT key.

ZONE:012   ADD RMV

The display shows the zone number.

ZONE MONITOR?

                ALL  NBR

ZONE: -    ADD  RMV

Selecting ADD
puts the zone in
the monitor mode.

Selecting RMV removes the
zone from the monitor
mode.

SELECT AREA . . .

This prompt allows you to search for a
zone by area. Press the COMMAND key
to scroll through the list of areas.

Bypass Zones Browser

Zone Monitor Browser

BYPASS ZONES?

ZONE: -     RST  BYP

SELECT ZONE . . .

COMMAND

Access the User Menu. Press
COMMAND until BYPASS ZONES
appears. Press any SELECT key.

Press either of the two left SELECT
keys.

SELECT AREA . . .

COMMAND

FRONT OFFICE

When the area where the zone is located
is displayed, press any SELECT key.

This prompt allows you to search for a
zone by area. Press the COMMAND
key to scroll through the list of areas.

Press the COMMAND key to scroll
through the list of all zone names.

EAST DOOR

When the correct zone name is
displayed, press any SELECT key.

ZONE:012 RST BYP

The display shows the zone number.
Press the SELECT key under RST to
Reset the zone. Press the SELECT key
under BYP to Bypass the zone.

ZONE: -     RST  BYP

The display returns to the ZONE:
prompt allowing you to enter
another zone number.

Summary of Contents for XR200-485

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands