20
XR200-485 User Menu
User Profiles
This option allows you to add, delete, or change User Profiles. A
profile defines the authority of each user code in the system. There
are several characteristics associated with each User Profile that
define its authority within the system.
Profile Number
- Each profile may be assigned a unique number
from 1 to 99. The Profile Number is the default Profile Name.
Profile Name
- Each profile may be assigned a 16 character name.
The Profile Number is used as the Default name.
Area Number
- Each profile may be assigned specific areas of the
burglary part of the system for arming and disarming. When profiles
1 to 98 are created, NO areas are assigned by default and the default
for profile 99 is ALL areas assigned. Profile 99 is already added to
the system by the factory.
Access Area Number
- Each profile may be assigned door access
area assignments. Default for profile 1 to 98 is NO areas assigned
and default for profile 99 is ALL areas assigned. Profile 99 is already
added to the system by the factory.
Output Group Assignment
- Each profile may be assigned an output
group number from 1 to 10. Default for profile 1 to 98 is NO output
group assigned and default for profile 99 is output group
ten
. Your
system may by programmed to turn on an output group at certain
keypads when a door access occurs.
User Menu Assignments
- Each user profile may have any of the
menus assigned to it as shown in the Profile table on page 21. For
explanations of User Menu Assignments, read the descriptions in the
pages that follow. The Profile table lists the user menu profile
assignments and the system functions users are allowed to access
based on the profile numbers assigned to their codes. The settings
listed in the table are default values and any of the profiles can be
changed.
When adding or changing a profile, only selections that your
code has authority to modify are shown.
Always make sure that at least one administrator code in your
system has a profile with
all
authorities.
Adding User Profiles
1. Access the User Menu.
2. Press COMMAND until
USER PROFILES?
displays.
3. Press any Select key. The keypad displays
ADD DEL CHG
.
4. Press the first Select key, under
ADD,
to add a new user
profile.
5. At the
PROFILE NO: -
prompt, enter an unused profile number
and press COMMAND. The display changes to
PROFILE NAME
.
6. Press any Select key and the display changes to
-
. Enter a profile
name of up to 16 characters. After the name is entered, press
COMMAND. See
Entering Names
in Appendix B.
7. At the
AREAS:
prompt, enter the area numbers (1-8) for arming
and disarming assigned to this profile.
8. The keypad displays
ACCESS:
. Enter the area numbers
(1-8) assignment to allow door access for this profile. Press the
COMMAND key.
9. The keypad displays
OUTPUT GROUP: -
. Enter the number (1-
10) for the Output Group assigned to this profile. Press the
COMMAND key.
10. The keypad displays each of the menus as shown in the Profile
Table on the following page for you to enable for this profile
number. Select YES or NO and press the COMMAND key to
advance to the next menu Selection.
11. When you have completed Selecting all User Profile menu
assignments, the keypad displays
PROFILE ## ADDED
message
for 4 seconds.
Summary of Contents for XR200-485
Page 1: ...User s Guide XR200 485 ...
Page 64: ...LT 0364 3 03 ...
