4
2
Overview and Controls
This section provides information about the rear panel. When you install this series NVR for the
first time, please refer to this part first.
2.1
Front Panel
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for detailed information.
SN
Name
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device (
Usually we do not
recommend
).
Press power button for a long time or pull out the power cable may
result in device auto restart.
2 System
HDD
Indication light
The blue light flashes when system is reading or writing the system
HDD.
In the system HDD, there are device important configuration file,
factory default configuration file, device initial boot up data.
3 Alarm
indication
light
The alarm indication light becomes on once an alarm occurred. It
becomes on via the software detection. The alarm includes local
alarm, no disk and etc.
4 Network
indication light
The network indication light is blue and it flashes when you connect
the device to the network.
5
USB port
/
6
Front panel lock
/
Without front panel, it is shown as in Figure 2-2.
Figure 2-2
