48
z
Alarm set: Click alarm set button, the interface is shown as below. See Figure 3-63. (This
interface is just like the abnormity setup). Please refer to chapter 3.6.2 for detailed
information.
z
HDD operation: You can select HDD mode from the dropdown list such as read-only or you
can erase all data in the HDD. Please note system needs to reboot to get all the modification
activated.
Figure 3-62
Figure 3-63
For the HDD group setup operation, please note:
z
Each channel’s records can be stored into the specified HDD Group.
z
Each HDD Group is corresponding to several hard disks, while one hard disk is only
included in one HDD Group.
z
Each channel is only corresponding with one HDD Group, while one HDD Group can
store records from several channels.
