5
Please refer to the following sheet for detailed information.
SN
Name
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device (
Usually we do not
recommend
).
Press power button for a long time or pull out the power cable may
result in device auto restart.
2 System
HDD
Indication light
The blue light flashes when system is reading or writing the system
HDD.
In the system HDD, there are device important configuration file,
factory default configuration file, device initial boot up data.
3 Alarm
indication
light
The alarm indication light becomes on once an alarm occurred. It
becomes on via the software detection. The alarm includes local
alarm, no disk and etc.
4 Network
indication light
The network indication light is blue and it flashes when you connect
the device to the network.
5
USB port
/
6
16 HDD slot
/
After you remove the front panel, you can see there are 16 HDDs. From the left to the right and
from the top to the bottom, it ranges from 1~4, 5~8, 6~12, 13~16. See Figure 2-3.
You can see there are two indication lights on the HDD bracket.
z
The power indication light is at the top. The light is yellow after you connected the device to
the power.
z
The read-write indication light is at the bottom. The blue light flashes when system is reading
or writing the data.
Figure 2-3
2.2
Rear Panel
The general rear panel is shown as in Figure 2-4.
Figure 2-4
