43
Figure 3-54
3.5.7 Display
Display setup interface is shown as below. See Figure 3-55 (general series) and Figure 3-56
(With HD decode card series). You can see there are decode parameters setup for the HD
decode card series product.
z
Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all your modification here only applies to
NVR local end. You need to open web or client end to refresh channel name.
z
Time display: You can select to display time or not when system is playback.
z
Channel display: You can select to channel name or not when system is playback.
z
Resolution:
There are two options: 1280
×
1024(default),1920×1080.
Please note the
system needs to reboot to activate current setup.
z
Enable tour: Activate tour function.
z
Interval: System supports 1/4/8/9/16-window tour. Input proper interval value here. The
value ranges from 5-120 seconds. In tour process, you can use mouse or click Shift to turn
on window switch function.
Stands for opening switch function,
stands for closing
switch function.
z
Monitor tour type: System support 1/8-window tour.
z
Alarm tour type: System support 1/8-window tour.
z
Encode mode: You can use this function for different environments when the device has HD
decode card. Decode display: The HD decode card decodes the data and then display on
the screen 3 to screen 6.
Please highlight icon
to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.
