Securam BSL-0601A-D66, User Manual

Page: 7 / 19

7
reader window and hold or enter the code of an administrator . After the fingerprint or code is
verified successfully, Press “▲” or “▼” to select “Disable User”. Press “▲” or “▼” to select
the ID No. to disable (e.g. ID 03).
Press “Menu/OK”.
When the LCD screen shows :ID:03 disabled , The ID 03 is disabled successfully.
Note: Administrators cannot be disabled.
8. Enable User (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again, Place an enrolled administrator’s finger (ID No. 01 or 02) on the
reader window and hold
or enter the code of an administrator . After the fingerprint or code is
verified successfully, press “▲” or “▼” to select “Enable User”.
Press “Menu/OK”.
Press “▲” or “▼” to select the ID No. to enable (e.g. ID 03).
Press “Menu/OK”.
Now the No. 03 user is enabled.
9. Set time delay (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again, Place an enrolled administrator’s finger (ID No. 01 or 02) on the
reader window and hold
or enter the code of an administrator . After the fingerprint or code is
verified successfully, press “▲” or “▼” to select Set/Cancel Time Delay.
Press “Menu/OK”.
Press “▲” or “▼” to set time delay (00 to 99 min). Press “Menu/OK”.
Press “▲” or “▼” to select Time Window (01 to 15 min).