4
Security Level Classification
Level 1:
Entrypad can be operated by a code only
.
Level 2:
Entrypad must be operated by a fingerprint and its bound code. It is a
higher security level.
Level 3:
Entrypad can be operated by a fingerprint or a code.
All enrolled users will be deleted when security level is changed. The first code
(ID No. 01) will be set to default 123456.
Note:
Factory default security level is Level 3.
Battery Replacement Instructions
1)
In the back of EntryPad you will see one 9V alkaline battery. Take the battery out
of the battery compartment.
2) Gently remove the connector by unsnapping it from the two terminals on the top
of the battery.
Never Pull on the Battery Leads.
3)
Connect a new 9V alkaline battery to the battery clip.
4) Put the battery and the leads completely back into the battery compartment.
For mounting and wiring information refer to the installation instructions.
1.Enroll the first fingerprint for quick start (level 3)
In the back of entry pad, you’ll find a battery case. Install a brand new 9V alkaline battery.
Place your finger on the fingerprint reader window , the LCD screen will show” Start Enrolling
First User”. After the screen shows ”Place Finger”, place your finger on the fingerprint reader
window and hold.
The first fingerprint with an ID No. 01 is enrolled successfully.
The default code 123456 will be deleted when you unlock once with the finger of ID
01 successfully .
2.Enroll the second fingerprint (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Place the first enrolled finger on the reader window and
hold . After the fingerprint is verified successfully, press “▲” or “▼” to select “ Enroll New
User”.
