6
5.Enable User Code (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Place an enrolled administrator’s finger (ID No. 01 or 02) on the
reader window and hold
or enter the code of an administrator
. After the fingerprint
or code
is
verified successfully, press “▲” or “▼” to select “Enable User Code”, press “Menu/Ok”.
press “▲” or “▼” to select the ID No. need to be enabled.
Press “Menu/Ok”
Now the code of ID No.3 user is enabled. Then set the code of ID No.3.
Press “Menu/Ok”, press “▲” or “▼” to select “System Menu”, get into the system menu with the
fingerprint of ID No.3 . Press “▲” or “▼” to select “Set/Chang User Code”.
Enter a new code(6 digits).
Enter the same code again.
When the LCD screen shows :ID:03 Code Saved , the code of ID:03 has been set successfully .
Note: If consecutive four digits of a new code (for example 512341)is same with one of the
enrolled codes(612345) , LCD screen will show : Code is similar .
6.Disable User Code (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Place an enrolled administrator’s finger (ID No. 01 or 02) on the
reader window and hold
or enter the code of an administrator
. After the fingerprint
or code
is
verified successfully, press “▲” or “▼” to select “Disable User Code”, press “Menu/OK”
Press “Menu/Ok”
ID No.3’s code disabled.
Note: This function can only disable the user’s code, not the user, the user can unlock the door by
fingerprint.
7.Disable User (Level 3)
Press “Menu/OK”. The screen will show “Select Menu”. Press “▲” or “▼” to select “System
Menu”. Press “Menu/OK” again. Place an enrolled administrator’s finger (ID No. 01 or 02) on the
