Secap SI5200, Operator'S Manual

Page: 124 / 196

6-12 SV61611 Rev. B
6 • Reference
High Capacity
Sheet Feeder
(HCSF) Material
Specifications
Sheets refer to material that must be folded before being inserted into stan-
dard letter envelopes. In the special case of flats, sheets may not be folded.
A group of sheets is referred to as a collation.
Material Substrates
Acceptable paper types include new or recycled bond, text, laser, offset and
single sheet NCR. Offset coatings including matt, dull or gloss.
NOTE: Use of glossy material may degrade system performance.
Grain
Material may be short or long grain.
Printing
Printing may be simplex or duplex with no restriction on color.
Coating
Varnish may be applied to sheets to modify finish.
Laser-Printed Material
Freshly laser-printed material which meets the curl requirements is accept-
able.
For reliable operation, all materials must conform to published specifica-
tions. Feed problems and high stall rates are often due to use of substan-
dard materials.
General
Information
Any material fed for letter size mail pieces must be capable of being trans-
ported through a 38 mm (1.5") radius 1/4 turn without deformation, breaking
of perforations, or any other damage to piece.
There is no color restriction on pre-printed materials.
Sheets