36
SI1000 Operator Guide (SV62138 Rev. A)
Reference
Message Meaning
and
Action
CHECK SHEET Sheet feeder A2 out of paper, failed to feed, or a jam that
FEEDER A2
was no cleared successfully from this area. Remove the
paper in sheet feeder A2, reload and start run.
CHECK SHEET
The machine has detected a material jam between
FEEDER A2
sheet feeder A2 and the collation area. Open the front
LIFT COVER D
cover D and remove all material inside. Close front
REMOVE ALL
cover D. Remove material from sheet feeder A2. Reload
and start run.
CLEAR FEEDER
This is due to the Manual Feeder M being blocked prior
M
to powering the machine up or starting it up. Check that
there’s no material in the feeder. If there is, remove it
and
restart.
CLEAR
This could be due either to a previous jam not being
STACKER AREA
cleared correctly in the stacker area or there is a jam
in the stacker area. Check that stacker area is clear.
Remove any material and resume run.
DOUBLE FEED
The machine has detected a double feed from sheet
CHECK FDR A1
feeder A1. Remove the paper in sheet feeder A1,
reload and start run.
DOUBLE FEED
The machine has detected a double feed from sheet
CHECK FDR A2
feeder A2. Remove the paper in sheet feeder A2,
reload and start run.
FOLD ONLY
Fold only has been selected but no sheets, either
REQUIRES
from feeder A1 or A2 (if applicable), have been
SHEETS
selected. In this state the indicators for sheet feeder A1
will be red, not green. Press the sheet feeder selection
button until the required feeder is selected.
