32
SI1000 Operator Guide (SV62138 Rev. A)
Move the Address in the Window
This menu option allows you to change the length of the fold panel
so that the address is centered in the envelope window. Make this
adjustment if the address in your trial piece appears to be too high or
too low in the window.
Make the adjustment by entering a number from 1 to 9. The
higher
the number, the
higher
the address will appear in the window.
The Menu
Change Paper Size
Paper: 8-1/2 x 11
Change Size?
Paper: 8-1/2 x 14
Change Size?
Choose this menu option to select
the paper (sheet) size you want
to run. You can set your SI1000 to
process letter-size sheets (8-1/2 x 11
inches) or legal-size sheets (8-1/2 x
14 inches).
Press the
Menu/Enter
button repeatedly until the display shows the
current paper size selection:
Paper: 8-1/2 x 11 Change Size?
or
Paper: 8-1/2 x 14 Change Size?
Press
yes
( ) to change paper size. The display confi rms the
change. Press
no
( ) to go to the next menu option without changing
the paper size setting. Press the
Menu/Enter
button repeatedly to go
back to the
Ready
screen.
IMPORTANT:
Always make sure the sheets you load
are the same size you’ve set the machine to run. If you
load the wrong size sheets, the machine will jam.
Please note that the paper size setting applies to
all
your machine’s
sheet feeders: that is, Sheet Feeder A1; the optional Sheet Feeder
A2 (if your machine is so equipped); and Manual Feeder M.
CAUTION:
DO NOT intermix sheet sizes in the same
job. The machine will jam if you attempt to do so.
