12
SI1000 Operator Guide (SV62138 Rev. A)
Sheet Feeder A1 is common to all models and is located immediately
below the Manual Feeder M. Sheet Feeder A2 is an option on all
models. It allows the machine to insert a second folded sheet into an
envelope.
Both feeders are used for sheets that require folding before inserting.
Load both feeders in exactly the same way.
Always fan (aerate) sheets before
you load them. This prevents them
from sticking together.
Then tap the stack of sheets onto
a fi rm surface to align the edges.
Place the sheets into Sheet
Feeder A1 or A2 as required.
IMPORTANT:
Always load sheets
into these feeders
face down
and
bot-
tom edge fi rst.
The
bottom edge of the
sheet is furthest
into the machine.
If you’re using both Sheet Feeders
A1
and
A2 at the same time, you
must
load the document printed
with the address into
Sheet Feed-
er A2
. If you load the address-
bearing document into Sheet
Feeder A1,
the address won’t be
visible in the envelope window.
Slide the back stop in until it just
touches the paper stack.
Loading
Loading the Sheet Feeders (Feeders A1 and A2)
