Brief overview
Secabo TC1 Heat Press
With its TC1, Secabo offers the perfect heat press for taking first steps in the world of textile
finishing and other transfer techniques. Thanks to its compact dimensions, the TC1 is also suitable
as a mobile press in the area of merchandising for sports, bands and other events. The Secabo
TC1 features a digital controller, which allows for pre-setting the transfer's time and temperature.
An acoustic signal sounds after the set time has expired. The contact pressure can be set using a
hand wheel on the upper side of the heat plate. The pressing process is initiated by closing the
press lever. The large opening angle allows for comfortable preparation of the transfer objects on
the base plate. The TC1 is equipped with a work surface of 15cm x 15cm and a heat plate with a
power consumption of 700W.
● affordable heat press for beginners
● mobile press for on-site use at events and merchandising
● large opening angle
● digital controller for temperature, time
● high heat output
Safety Precautions
Please read the information and safety precautions carefully prior to first commissioning of the
device!
● Never reach inside the heat press with your hands when it is connected to the power
supply, especially if it is switched on and heated up – danger of burns!
● Never open the casing and do not make any modifications to the unit yourself.
● Should it be necessary to open the heat plate cover upon explicit request by Secabo's
customer service team, it is recommended you wear respiratory protection and only touch
the insulation wool located therein using gloves. Possible disposal of the insulation wool
should only be done inside a closed bag.
● Ensure that neither liquids nor metal objects reach the inside of the heat press.
● Make sure you use a grounded wall socket. Keep in mind that a heat press may only be
operated using a wall socket equipped with a ground fault circuit interrupter.
● Disconnect the heat press from the power supply when it's not in use.
● Always ensure that the heat press is out of reach of children during operation and never
leave the device unsupervised when switched on.
● Make sure the unit is only used in dry rooms.
If you cannot comply with one or more of the aforementioned safety rules, or if you are
unsure as to whether you're in compliance with all of the points, please contact our
technical support.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania [email protected] www.secabo.com
