Note on garment finishing processes: After the press operation, garments must cool off
before any carrier media can be pulled off the transfer material. The hot glue in the transfer
material doesn't develop its adhesive strength until cooled off. If the glue does not stick in
its cold state, this may indicate that the pressing procedure was too cold or too short.
Technical data
Heat press
SECABO TC1
Type
manual clam press
Working area size
15cm x 15cm
Max. temperature
255°C
Max. preset time
999s
Max. working pressure
500g/cm²
Pressure setting
Height-adjustment of the heat plate via hand
wheel
Power supply
230V / 50Hz - 60Hz, 700W
Environment
+ 5°C - +35°C / 30% - 70% relative humidity
Weight
11kg
Dimensions (W x H x D)
16cm x 30cm x42cm
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania [email protected] www.secabo.com
