Maintenance and cleaning
All maintenance work must be carried out with the press switched off and cooled off, no
exceptions! First, remove the plug from the wall socket. Only perform maintenance work after
consultation with our technical support team.
The press should be cleaned regularly using a soft cloth and a mild household cleaner to remove
adhesive residues, etc. Do not use scouring sponges, solvents or gasoline!
Recommended times and temperatures
These values should only be considered as guideline values, may vary depending on the material
and must be checked before pressing.
Material
temperature
Pressure
Press duration
Flock film
170°C - 185°C
low-medium
25s
Flex film
160°C - 170°C
medium-high
25s
Sublimation flex
180°C - 195°C
medium-high
10s - 35s
Sublimation on
mugs
200°C
medium-high
150s - 180s
Sublimation on tiles
200°C
high
120s - 480s
(depends on the thickness of the
material)
Sublimation on
puzzles
200°C
low-medium
25s
Sublimation on
mouse pads
200°C
medium
20s - 40s
Sublimation on
garments
200°C
medium-high
30s - 50s
Sublimation on
metal plates
200°C
high
10s - 50s
(depends on the thickness of the
material)
Important note: You should perform your own tests with the respective transfer materials
and carrier media prior to each production. The aforementioned values, as well as any
manufacturer specification merely serve as indications. Washing resistance and behavior
during the transfer must be determined by performing your own tests.
No guarantee can be derived from the recommended values. It is always the user's
responsibility to determine and apply the correct settings for his specific conditions.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania [email protected] www.secabo.com
