Seat SOUND SYSTEM 1.0, Manual, Page: 101 / 124

NAV (navigation system) 100
Storing a route
Calculated routes can be stored and subsequently loaded as
a new navigation destination.
Fig. 110 Navigation: Storing a route
– Enter a route plan
⇒
page 92.
– Press the Memory control button.
– Select Store route .
– Select New entry .
– Select and enter a name for the route using the speller.
– Select OK in the alphanumeric speller.
– Select Store route .
You can store a destination and up to six stopovers in the route plan
⇒
page 92. You can then consecutively or directly drive to each of the stopo-
vers in the order set by you.
The route entered will be saved with the final destination and stopovers and
can be loaded again as a new destination
⇒
page 99.
You can change the route plan at any time
⇒
page 101.
Up to five routes can be stored in the memory. If the route memory becomes
full, you will be notified of this by a message on the display. You must then
delete existing routes to be able to store new routes.
Note
You can store a route guidance for a single destination in the directory
⇒
page 98.
Deleting a route
Fig. 111 Navigation: Deleting routes
– Press the Memory control button in the navigation menu.
– Select Delete route .
– Select Delete a route and turn and press the rotary pushbutton to
select a route from the list or
Media System 1.0_EN.book Seite 100 Donnerstag, 10. September 2009 1:52 13