manualshive.com logo in svg

Seat SOUND SYSTEM 1.0, Manual, Page: 99 / 124

Share
Download
Seat SOUND SYSTEM 1.0 Manual Download Page 99

NAV (navigation system)

98

– Press the control button for 

Start

 to begin the route guidance.

The special destinations are sorted according to the distance from your 
current location.

The following top categories are available:

•

Next car park

•

Next petrol station

•

Next SEAT dealer

•

Next hospital

•

Next restaurant

•

Hotel near destination

•

Restaurant near destination

•

Car park near destination

Note

If no top destination is found in the category selected, the navigation system 
has no top destination in the vicinity stored for this category or it is not avail-
able in the navigation CD.

Storing a destination in the directory

The current destination can be stored in the directory.

Fig. 107  Navigation: Store current destination

Fig. 108  Navigation: Directory

– Enter a single destination 

⇒

page 91.

– Press  the 

Memory

 control button.

– Select 

Store in directory

.

– Select 

New directory entry

 

⇒

fig. 107

 and complete the direc-

tory card or

Media System 1.0_EN.book  Seite 98  Donnerstag, 10. September 2009  1:52 13

Summary of Contents for SOUND SYSTEM 1.0





























































































































Reviews:

No comments