Seat SOUND SYSTEM 1.0, Manual

Page: 96 / 124

NAV (navigation system) 95
Operating RADIO, CD/MP3 TEL (telephone) NAV, INFO SETUP
– In the destination entry menu
⇒
page 90, fig. 97 , select a
country from the list by rotating and pressing the control knob.
– Select Special destination
⇒
page 90, fig. 97 .
– For the special destination required, select a category ( In
immediate vicinity , In vicinity of destination or Along the route )
⇒
page 94, fig. 103 .
– Select the special destination from the category list.
– Select Set as destination . The special destination is automati-
cally transferred to the route guidance.
– Press the control button for Start . The route will be calculated.
In immediate vicinity
This special destination category refers to the immediate vicinity of the
vehicle in its current location. This function is especially useful when you are,
for example, trying to find the nearest restaurant.
The special destinations displayed in the list are sorted according to the
distance from your current position (in a straight line). The displayed distance
to the destination can differ considerably from the actual distance to be
driven by car.
In vicinity of destination
This special destination category refers to a previously calculated destination
and is useful when, for example, trying to find a car park or hotel at or near
your final destination.
Nationwide
This special destination is not connected with any previously selected desti-
nation. This refers to the country in question.
This function can be used for guidance to the nearest service area or airport.
Note
•
Options that are not available due to your preset criteria cannot be
selected (these are greyed out in the display).
•
There are sometimes destination entries in the list that cannot be
displayed completely because they are too long (too many characters). If you
select one of these entries using the control knob, a second window will open
up after a few seconds. This screen will show more information about the
selected entry.
Entering the destination via position coordinates
You can enter the longitude and latitude coordinates for a
destination using the “Position” option.
– Select the option Position in the navigation menu.
– Turn and press the rotary pushbutton to enter the desired longi-
tude and latitude coordinates.
– Press the control button for
Start
to begin the route guidance.
Changing/Interrupting route guidance
Changing the route
– Press the button.
– Enter the new data for single destination (route without stopover)
or route plan (route with stopovers) guidance.
NAV
Media System 1.0_EN.book Seite 95 Donnerstag, 10. September 2009 1:52 13