Seat SOUND SYSTEM 1.0 Manual Download Page 53

Page: 53 / 124

CD/MP3

Setup CD

MP3 track display

The name of the file or the ID3 tag information can be
displayed for an MP3 CD.

Fig. 60 CD Setup: Display MP3 tracks

– Starting from any of the CD menus, press the

button.

– Select

Display MP3 tracks

MP3 track display activated: The ID3 tag information is displayed in the main
CD menu.

MP3 track display deactivated: the file name will be displayed in the main CD
menu.

The sound and tuning settings and the brightness of the display can be
altered using the control buttons

⇒

page 118.

Note

We recommend that you enter these settings when the vehicle is stationary.
Please note

⇒

page 6, “Notes on road safety”.

SETUP

Media System 1.0_EN.book Seite 52 Donnerstag, 10. September 2009 1:52 13

Summary of Contents for SOUND SYSTEM 1.0





























































































































Search results

Summary of Contents for SOUND SYSTEM 1.0

Reviews:

Related manuals for SOUND SYSTEM 1.0

Brands by name

Popular brands

Seat SOUND SYSTEM 1.0, Manual

Search results

Summary of Contents for SOUND SYSTEM 1.0

Reviews:

Related manuals for SOUND SYSTEM 1.0

Brands by name

Popular brands