Seat SOUND SYSTEM 1.0, Manual

Page: 37 / 124

RADIO 36
AM station list
The MW and LW band radio station lists are static and must be
updated manually.
Fig. 36 Radio: AM station list
– Press the function button
⇒
page 8.
– Using the rotary pushbutton, select the desired radio station
from the MW or LW radio station list, or
– Select Update station list to update the list with the currently
receivable stations.
If the radio is not already set to the MW or LW station list, you can switch over
to the waveband as described on
⇒
page 34.
The MW / LW station list is static and can be updated manually. All the MW
and LW stations that can be received are included in the station list at this
time. The list is limited to a maximum of 30 stations.
If you are outside the transmission range for your station, it will still be
displayed but there will be interference in the signal. In this case, it is advis-
able to update the station list.
Note
If you do not use the navigation system for a while, the display of the station
list or memory list will be minimised. The minimised display only shows the
radio station you are currently listening to. Turn the rotary pushbutton to
display the complete station list or memory list again.
Switching on the radio from the dash panel display
A station can be selected from the list using the multi-func-
tion steering wheel.
– Press the function button
⇒
page 8 if the radio is
switched off.
– Press the button on the multi-function steering wheel
⇒
page 14 until the name of the station appears at the top of the
dash panel display.
– Turn the left thumbwheel on the multi-function steering wheel to
select a radio station on the frequency band set.
RADIO
RADIO
MODE
Media System 1.0_EN.book Seite 36 Donnerstag, 10. September 2009 1:52 13