Seat SOUND SYSTEM 1.0, Manual

Page: 29 / 124

Drives 28
2. Flat adapter plates for inserting into the slot above the bay .
3. Wide adapter casing for inserting into the bay .
There are also some iPods that do not require an adapter (e.g. iPod Photo 60
GB)
Caution
The iPod must be firmly seated in the iPod interface. The iPod may be
damaged if it is not installed correctly.
•
Make sure that the iPod is fixed in place with one of the adapters
supplied.
Note
•
Your Dealer also offers appropriate adapters for iPods that are not latest
generation.
•
For further information on adapter adaptation, please see the information
enclosed with the adapters supplied.
Inserting the iPod into the iPod interface
– Switch on the navigation system
⇒
page 5.
– With the display facing upwards and the contact towards the
front, slide the iPod into the bay until you hear it engage. The
iPod will switch on automatically and the battery will be charged.
– If the navigation system does not detect the iPod after you insert
it, please “reset” the iPod (refer to the iPod operating instruc-
tions).
To start the iPod, press the button
⇒
page 46.
The iPod is switched off automatically when you switch off the navigation
system or the ignition.
Note
•
To ensure optimum sound quality, you should enable the “sound check”
setting on the iPod and disable the “EQ” (equaliser) before inserting the iPod
(please refer to the iPod operating instructions).
•
Slight scoring marks may occur on the iPod when used with the adapter.
iPod No. adapter
classic 80 GB,
4G 20 GB 1
5G (video) 30 GB, touch 3
5G (video) 60/80 GB,
Photo 30 GB 4
classic 160 GB,
3G 10-20 GB 5
iPod No. adapter
classic 160 GB,
5G (video) 30/60/80 GB 8
classic 80 GB 12
touch 13
iPod No. adapter
nano 2G 10
nano 3G 11
A
3
A
4
CD/MP3
Media System 1.0_EN.book Seite 28 Donnerstag, 10. September 2009 1:52 13