Radio / CD / Sound
12
Listening to a CD
– Press the
⇒
page 4, fig. 1
button. If a CD is already in the
player, the last played track will be selected, otherwise the
following will appear briefly on the screen: “No Audio CD”.
– Insert a standard 12 cm audio CD. The play function will start
automatically.
Playing the previous or next track
– Press button
or
briefly
.
Fast forward/reverse
– Press and hold button
or
.
Ejecting a CD
– Press
⇒
page 4, fig. 1
.
The number of the track and its length are shown on the screen.
TMC
lights
up in red when traffic bulletins are desired and
TMC
indicates whether TMC
stations are being received
⇒
page 11, fig. 9
Function keys during the play function:
...
– Selects the corresponding disc of the
CD changer
2)
.
– Plays the disc inserted in the reader.
– All tracks on the CD will be played for 8 seconds at a time.
– The tracks on the CD will be played in a random order.
⇒
page 42
WARNING
The CD player is a class 1 laser product. If it is opened, or is faulty or
damaged, there is a risk of invisible laser beams escaping from the unit.
The CD player contains no parts that have to be serviced. Any repair work
that needs to be done should, therefore, be carried out by an Official SEAT
Service exclusively.
Caution
•
Only 12 cm standard CDs should be used, avoid 8 cm "single" CDs. Only
round CDs should be inserted in the CD slot. “Special shape CDs”), can not
be played and they will damage the CD player.
•
Slide the CD with the printed side up into the CD slot up to the point where
it is drawn in automatically. Hold the CD at the sides. Avoid leaving finger-
prints on the CD. Clean CDs with a dry, lint-free cloth. When doing this, wipe
the CD from the centre outwards. Do not clean the CDs using alcohol or
solvents. Do not place the CDs near heat sources or in the direct sunlight. Do
not write on the CDs and do not attach stickers to them.
Note
•
The upper 6 function keys are only active if a CD changer has been
connected.
•
CD-R and CD-RW formats can also be played, depending on the quality of
the blanks.
•
If the text
CD ?
is displayed in the small marking above the
/
button, the CD inserted in the CD drive can not be read and may be
damaged.
2)
Optional equipment
CD
A
8
CD1
CD6
CD int.
Scan
Mix
System settings
CD6
NAVI
radionaving Seite 12 Mittwoch, 30. März 2005 12:26 12
