Radio / CD / Sound
10
Station selection from a list (FM only)
The MFD2 radio navigation system will automatically compile
and store a list of receivable FM stations, after the unit is
switched on.
– Press
in the radio main menu
⇒
page 8, fig. 4
to see
the stored stations.
– Select a station by turning and pushing the menu knob or by
using the right-hand function keys.
– Select a station from the list by turning and pushing the menu
knob. You can scroll through several pages of the list using the
scroll markers
,
,
and
and confirm your selection by
pressing .
Station selection from memory or by entering frequency
Station selection from memory
– Briefly press button
or
to listen to the stored station.
Station selection by entering frequency
– Press the button
,
⇒
page 4, fig. 1
or
for
longer than 2 seconds. A station frequency in a red frame will
appear in the middle of the screen. The frequency will change as
long as the buttons
or
are pressed and held.
– For fine tuning, release the button
or
and press the buttons
or
again within 2 seconds to set the exact frequency.
The word
manual
appears on the screen during the frequency input. The
search will start in the direction that you have selected in steps of
0.1 MHz (FM) or 9 kHz (AM). In this way you can enter a frequency that you
wish to listen to. The frequency can also be altered by turning the menu
knob.
Allocating the stations to the station buttons
Stations can be allocated to the buttons to make it easier to
select them quickly.
– Press one of the upper 6 station buttons until you hear a signal
⇒
page 4, fig. 1
. The station you are listening to is now
stored on the button.
A total of six stations can be stored on the station buttons for each mode;
FM1, FM2 or AM1 or AM2. The short form of the station name or the station
Fig. 7 List of stations
List/_MAN
OK
A
5
Lista/_MAN
A
4
radionaving Seite 10 Mittwoch, 30. März 2005 12:26 12
