Quick Reference Guide
7
Switching on/off
– Press the left button
⇒
page 4, fig. 1
.
– Press the left button again, to switch the unit off.
Entering the safety code
– The safety code can be found on the unit card.
– Enter the characters by turning and pressing the menu knob
⇒
page 6, fig. 3
.
– Press
if you wish to change incorrect digits.
– Once the safety code as entered corresponds to the code given
on the unit card, press
.
The last menu used and also the last audio source used before switching off
will be selected automatically when the unit is switched on again. The MFD2
radio navigation system will be switched off if the ignition is turned off. The
unit can be switched on again using the left button when the ignition is
switched off. It will be switched off automatically after an hour to stop the
vehicle battery from running down.
If no CD has been introduced into the unit, upon entering the safety code and
pressing
the following message may appear:
No CD inserted. Insert a CD-
ROM for SEAT Dynamic Navigation MFD2.
If you do not wish to use the navigation system immediately, you can still
select a different audio source by pressing the appropriate button.
Unit card
The code number is printed on a unit card together with the serial number.
This card can be found at the front of the vehicle wallet.
The unit card must be kept in a safe place - under no circumstances in the
vehicle! Only then will the unit be useless to thieves.
Note
If a wrong code is entered twice repeatedly, the system is locked for an hour.
After this time has passed you may enter the safety code.
A
1
OK
OK
radionaving Seite 7 Mittwoch, 30. März 2005 12:26 12