Navigation
31
Blocking part of the route list
– Press
and
. You will see a part of your
route list.
– Using the menu knob, move the red bar to a line that starts with
+
or
-
. The stretches of the route are broken down into sections
and can be opened or closed by pressing
or
.
– Turn the menu knob to move the yellow bar to the start of the
section that you wish to exclude from the navigation. Press the
menu knob. The entry is now red.
– Turn the menu knob. All stretches of the route that are blocked
will appear in red. Press the menu knob once you have marked
the route section in question. The display will be switched to the
map. You will hear an announcement that: “The route is being
calculated”. The excluded stretch of the route will be shown as a
dotted blue line on the map.
– Press
to delete the blocking
function.
You will be guided through a blocked area if there is no logical alternative to
travelling through it.
Note
If you use a map CD which contains only major routes, you will have less alter-
native routes than if you use a CD which contains minor roads. To ensure that
you do not have to make unnecessary detours, you should use a map CD
containing all roads when you wish to be guided around congestion on the
route.
Route list
Route list blocked
Route list Cancel exclusion option
radionaving Seite 31 Mittwoch, 30. März 2005 12:26 12
