background image

• 10 •

01284 757500

01284 703534

[email protected]

Sole UK distributor, 

Sealey Group, 

Kempson Way, 

Suffolk Business Park

Bury St. Edmunds, 

Suffolk,IP32 7AR

www.sealey.co.uk

NOTE:

 It is our policy to improve products continually and as 

such we reserve the right to alter data, specifications and 

component parts without prior notice.

IMPoRTANT: 

No liability is accepted for incorrect use of this 

product. 

lIMITed WARRANTY: 

Guarantee is 2 years from purchase date 

for the unit, 1 year for the batteries. Proof of purchase will be 

required for any claim. 

Parts support is available for this product. Please contact:

email [email protected] or telephone 

01284 757500.

Weee ReGUlATIoNS

Dispose of this product at the end of its working life in 
compliance with the EU Directive on Waste Electrical 
and Electronic Equipment (WEEE). When the product 
is no longer required, it must be disposed of in an 
environmentally protective way. Contact your local 
solid waste authority for recycling information.

eNVIRoNMeNT PRoTecTIoN

Recycle unwanted materials instead of disposing of 
them as waste. All tools, accessories and packaging 
should be sorted, taken to a recycling centre and 
disposed of in a manner which is compatible with the 
environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids 
(if applicable) into approved containers and dispose of 
the product and fluids according to local regulations.

Summary of Contents for SL65S.V2











Reviews: