background image

• 5 •

5.  COnTEnTs

• SL65S jump starter

• Battery clamps  

with smart cable

• Carrying case

• Owners manual

6.  FEATUREs

 

 

7.  ChARging ThE JUMP sTARTER

iMPORTAnT! ChARgE iMMEDiATElY AFTER PURChAsE, 

AFTER EACh UsE AnD EVERY 30 DAYs, OR WhEn ThE 

ChARgE lEVEl FAlls BElOW 85%, TO KEEP ThE inTERnAl 

BATTERY FUllY ChARgED AnD PROlOng BATTERY liFE. 

7.1  ChECKing ThE lEVEl OF ThE inTERnAl BATTERY

1.  Slide the ON/OFF switch to the ON position. The LCD display will show 

the battery’s percentage of charge. A fully charged internal battery will read 

100%. Charge the internal battery if the display shows it is under 85%.

2.  To reduce the risk of electric shock, unplug the USB charging cable from the 

outlet before attempting any maintenance or cleaning. Simply turning off the 

controls will not reduce this risk.

3.  When charging the internal battery, work in a well ventilated area and do not 

restrict the ventilation in any way.

1.  SL65S.V2

2.  Battery clamps  

with smart cable

3.  Green & red smart cable 

LED’s

4.  Carrying case

5.  Micro USB cable 

6.  LCD display 

7.  ON/OFF switch

8.  Input socket for recharging

9.  USB port – 2.1A

10.  USB port – 1A

11.  Jump start output socket

12.   Display ON/OFF button

13.  LED light (on back)

Summary of Contents for SL65S.V2











Reviews: