![background image](http://html.mh-extra.com/html/sealey/auto-service-vs8197-v2/auto-service-vs8197-v2_instructions-manual_1224498002.webp)
Page 2
Original Language Version
VS8197.V2 Issue: 1 - 23/11/11
7. Warranty Information
.......................................................................32
7.1 Service Procedures
...................................................................32
1. Safety Instructions
IMPORTANT: To prevent electric shock, fire and/or personal injury or
damage, read this user’s manual first and observe the following safety
instructions.
1.1. Work Area Safety
Always perform automotive testing in a safe environment.
•
Keep your work area clean and well lit. Cluttered benches and dark areas
•
may cause accidents.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving
•
or hot engine parts.
Operate the scope in a well-ventilated work area.
•
Do not operate the scope in explosive atmospheres, such as in the presence
•
of flammable liquids, gases, or heavy dust.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires
•
nearby.
Do not use the scope around corrosive chemicals which can ruin the photo
•
quality.
Keep bystanders, children and visitors away while operating the tool.
•
Keep the scope dry, clean, free from oil, water and grease. Use a mild
•
detergent on a clean cloth to clean the outside of the scope when necessary.
1.2. Electrical Safety For Use
O
f C
harger
uSe onlY tHe SuPPlIed cHArGer PluG for connectInG Bore
ScoPe to tHe PoWer SuPPlY.
WArNiNG!
It is the user’s responsibility to read, understand and comply with
the following electrical instructions:
You must ensure the risk of electric shock is minimised by the installation of
•
appropriate safety devices.
An RCCB (Residual Current Circuit Breaker) should be incorporated in
•
the main distribution board. We also recommend that an RCD (Residual
Current Device) is used with all electrical products, particularly portable
equipment which is plugged into an electrical supply not protected by an
RCCB.
You must also read and understand the following instructions concerning
•
electrical safety.
1.2.1.
The Electricity At Work Act 1989 requires all portable electrical appliances,
if used on business premises, to be tested by a qualified
1. Safety Instructions