Page 15
VS8197.V2 Issue: 1 - 23/11/11
Original Language Version
5.2 Operation Precautions
Use the tool only as directed. Do not operate the tool unless the user’s manual
•
has been read thoroughly and proper training has been completed.
The display unit is not waterproof. The imager head and cable are waterproof,
•
but not acid-proof or fireproof. Avoid submersing the imager head and cable
into corrosive, oily places and be sure to keep the imager head and cable away
from high temperature objects.
DO NOT
•
immerse the tool and display unit in water.
DO NOT
•
use excessive force to insert or withdraw the imager head and cable.
This may result in damage to the tool or inspection area.
DO
•
NOT use the imager head and cable to modify surroundings, clear
pathways or clogged areas.
DO NOT
•
place the imager head and cable into anything or anywhere that
may contain a live electric charge or moving parts, which increase the risk of
electric shock or entanglement injuries.
DO NOT
•
use the tool for personal inspection or medical use in any way. This
is not a medical tool.
DO NOT
•
eat or smoke while operating the tool. Use hot, soapy water to wash
hands and other exposed skin after using the tool to inspect drains and other
areas that may contain chemicals or bacteria.
When the inspection is completed, carefully withdraw the imager head and
•
cable from inspection area.
Store idle components out of the reach of children and other untrained
•
persons.
Maintain the tool with care. Properly maintained tools are less likely to cause
•
injury.
DO NOT
•
drop the tool, if the tool is dropped accidently, check for the
breakage and any other conditions that may affect its operation.
Use only accessories that are recommended by the manufacturer for the tool.
•
Dry your hands when operating the tool or charging battery.
•
Always use appropriate personal protective equipment while handling and
•
using the tool. Appropriate personal protective equipment always includes
safety glasses and gloves, and may include latex or rubber gloves, face
shields, goggles, protective clothing, respirators and steel toed footwear.
Protect against excessive heat. The tool should be kept away from heat
•
sources such as radiators, stoves or others that produce heat. Do not use the
tool near moving machinery or areas where the temperature will exceed 113
°F
(45°C).
Store the tool, charger and all cables in a locked area out of the reach of
•
children and people unfamiliar with tool.
