Page 10
Original Language Version
VS8197.V2 Issue: 1 - 23/11/11
3. Installation and Connection
3.1 The Imager Head and Cable Installation
To use the tool, the imager head and cable must be connected to the display
unit. To connect the cable to the display unit, make sure the key and slot
(Fig. 4)
are properly aligned. Once they are aligned, tighten the knurled
knob to hold the connection firmly in place.
Fig.4
3.2 Accessories Installation
The two accessories include a magnet and a mirror (Fig.2). Both of the
accessories are attached to the imager head in the same manner, here we are
showing you how to attach the accessories using a magnet as an example.
Hold the imager head as shown in Fig.5
Fig. 5
Screw the accessory onto the imager head to fix
(Fig. 6)
.
3. Installation and Connection
