Section 1. Introduction
6
The
AquaSEAL™ SW-5000
is a medium, large, and grand format media liquid laminator
used to coat graphics with a protective sealant. Operating either roll or fan fed, the
media is threaded through the applicator mechanism, under the drying assembly, and
onto the take-up roller. During operation, the liquid laminator applies sealant onto the
printed graphics and then cures and dries it before winding the media onto the take-up
roller.
Hardware Overview
Figure 1-1 shows the front view of the liquid laminator. Major components
(safety items
shown in red)
include the following:
Figure 1-1. Front View
Safety
Interlock Switch
Dryer Panel
Meyer Bar
Assembly
Draw Down
Assembly
Web
Idler
Tension
Idler
Emergency
Stop
Control Panel
Applicator
Tube
Summary of Contents for AquaSEAL SW-5000
Page 22: ...Section 4 After Sales Support 21...
