Page
126
LTO SCSI Interface Manual
Completion Status
Code
Message
Description
00h
Good
Status
•
The filemarks have been sent to the buffer.
•
The drive remains in any previously set mode.
Note: If Immed is 1, then Good Status only indicates that the command is
valid.
02h
Check
Condition
Use the Request Sense command to retrieve status information. Possible
Sense Keys are:
Code
Message
Description
02h
Not Ready
No cartridge is in the drive.
03h
Media Error
Unrecoverable data error encountered.
04h
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed, or the drive was
reset prior to this command.
07h
Write Protect
The tape is write-protected; check the cartridge
before continuing.
0Dh
Volume
The command completed with Overflow data in
the buffer because EOT was encountered.
