Seagate Viper 200, Scsi Interface Manual

Page: 25 / 136

Page
16
LTO SCSI Interface Manual
SCSI Commands
This chapter describes the SCSI commands for the LTO tape drive.
Command Set
The following table shows the SCSI commands for sequential access devices
implemented by the drive.
Group Code Command Page
0 00h Test Unit Ready 116
0 01h Rewind 110
0 03h Request Sense 98
0 05h Read Block Limits 79
0 06h Park Unpark 79
0 08h Read 73
0 0Ah Write 120
0 10h Write Filemarks 125
0 11h Space 114
0 12h Inquiry 22
0 13h Verify 118
0 15h Mode Select 42
2 55h Mode Select 42
0 16h Reserve Unit 108
0 17h Release Unit 91
0 19h Erase 20
0 1Ah Mode Sense 64
2 5Ah Mode Sense 64
0 1Bh Load Unload 33
0 1Ch Receive Diagnostic Results 89
0 1Dh Send Diagnostic 111
0 1Eh Prevent/Allow Medium Removal 70
0 0Bh Set Capacity 112
1 2Bh Locate 36
1 34h Read Position 84
1 3Bh Write Buffer 122
1 3Ch Read Buffer 81
2 44h Report Density Support 93
2 4Ch Log Select 38
2 4Dh Log Sense 42
2 56h Reserve Unit 108
2 57h Release Unit 91
3 A0h Report LUNS 96