Seagate Viper 200, Scsi Interface Manual

Page: 113 / 136

Page
104
LTO SCSI Interface Manual
Sense
Key
Byte 2
ASC
Byte 12 ASCQ
Byte 13
Message Explanation
03h 14h 00h Recorded entity not found A Space or Locate failed because a
format violation prevented the tar-
get of the operation from being
found.
03h 14h 01h Record not found
03h 30h 00h Incompatible medium in-
stalled
03h 30h 02h Cannot read medium in-
compatible format An operation could not be com-
pleted because the Logical Format
is not correct.
03h 30h 07h Cleaning failure
03h 30h 80h Firmware tape fail
03h 31h 00h Medium format corrupted Data could not be read because the
format on tape is not valid, but is a
known format
03h 3Bh 00h Sequential positioning er-
ror A command has failed and left the
logical position at an unexpected
location
03h 3Bh 01h Tape position error at
BOM
03h 3Bh 02h Tape position error at
EOM
03h 3Bh 08h Reposition error
03h 50h 00h Write append error A Write type command failed be-
cause the point at which to append
data was unreadable.
03h 50h 01h Write append position er-
ror
03h 51h 00h Erase failure
03h 52h 00h Cartridge fault A command could not be com-
pleted due to a fault in the tape car-
tridge
03h 52h 01h Media end of life
03h 53h 00h Media load or eject failed An attempt to load or eject the tape
failed due to a problem with the
tape
03h 53h 01h Unload tape failure
03h 70h 00h Decompression exception
short algorithm id of nn
04h Hardware Error
04h 15h 01h Mechanical positioning er-
ror
04h 40h BDh HE diagnostic task time-
out
04h 44h 00h HE internal target failure
04h 44h D0h AIC interrupt DMA FIFO
overrun or underrun
04h 44h D1h AIC interrupt DMA offset
error
04h 44h D2h AIC interrupt DMA parity
error
04h 44h D3h AIC interrupt read parity
error