48
Revision 2.EL950 1.3.1074C 18.6
Bill Validator Errors
Error Message
Description
Possible Solutions
Bill Val Comm
VMC does not have communication with the bill
validator.
Check MDB Harness to validator. Check for power on
validator.
Bill Val Stack Full
The bill validator has reported that the stacker is full of
bills.
Check bill stacker box for bills. See validator service
manual.
Bill Val Motor Err
The bill validator reports that a validator motor error
has occurred.
See validator service manual.
Bill Val Jam
The bill validator reports a bill is stuck in the bill path.
Check validator bill path for bills. See validator service
manual.
Bill Val Stack Open
The bill validator is reporting a bill box is open or not
installed.
Check bill stacker box for open lid. See validator
service manual.
Bill Val Sensor Err
The bill validator reports a sensor error.
See validator service manual.
Bill Validator Errors
Error Message
Description
Possible Solutions
Bill Val Comm
VMC does not have communication with the bill
validator.
Check MDB Harness to validator. Check for power on
validator.
Bill Val Stack Full
The bill validator has reported that the stacker is full of
bills.
Check bill stacker box for bills. See validator service
manual.
Bill Val Motor Err
The bill validator reports that a validator motor error
has occurred.
See validator service manual.
Bill Val Jam
The bill validator reports a bill is stuck in the bill path.
Check validator bill path for bills. See validator service
manual.
Bill Val Stack Open
The bill validator is reporting a bill box is open or not
installed.
Check bill stacker box for open lid. See validator
service manual.
Bill Val Sensor Err
The bill validator reports a sensor error.
See validator service manual.
Card Reader 1 and 2 Errors
Error Message
Description
Possible Solutions
Card RDR1 or 2 Comm
VMC does not have communication with the
card reader.
Check MDB Harness to card reader. Check for
power on card reader.
Card RDR1 or 2 Err
The card reader reports an error
See card reader service manual.
NOTE:
Errors are cleared after the problem detected has been resolved.
