Seaga INF4B, Service And Parts Manual

Page: 42 / 77

42 Revision 2.EL950 1.3.1074C 18.6
SHUTDOWN
This menu sets the VMC to shut down All Items, by Row or by Selection, based on four (4) time of day
intervals. If the time falls within one of these intervals and the entire machine has been selected for
shutdown, then the message, “Vending Operation to resume at hh.mm,” will be displayed. If a row or
individual selection has been set for Shutdown, the same message displays once every time the customer
makes that selection or selections (row).
NOTE: The correct time and date must be set so that the shutdown intervals work correctly. See Time
and Date section of this manual. Also, for any given day these four time intervals may overlap each other.
For each interval, the VMC can be programmed from no days up to every day of the week on which the
specified shutdown time intervals are active.
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 5 for Shutdown Shutdown
5. Press 1 for Interval1 (2 for Interval2, and so on) Interval1
6. Press 1 to for All Items All Items (Current Setting) *-Exit 1-Edit
7. Press 1 to toggle ON/OFF All Items (Choice Flashing) * Exit #-Save
8. Press # to save the setting All Items (New Setting) *-Exit 1-Edit
9. Press * to return to Interval1 Interval1
10. Press 4 for Day menu Day
11. Press 1 for All Days All Days (Current Setting *-Exit 1-Edit
12. Press 1 to toggle All Days ON/OFF All Days (New Setting) *-Exit #-Save
13. Press # to save the setting All Days (New Setting) *-Exit 1-Edit
14. Press 2 to toggle Monday ON/OFF Mon (Choice Flashing) *-Exit 2-Edit
15. Press # to save the setting Mon (New Setting) *-Exit 2-Edit
Use numbers 3-8 to complete the other days of the week using steps 13 and 14.
16. Press * two times to return to Interval1 menu
Interval1
17. Press 5 two times for Start Time menu (Current Time) *-Exit 5-Edit
18. Enter Start Time in 24-hr time (HH:MM) New Time *-Exit #-Save
19. Press # to save the time New Time *-Exit 5-Edit
20. Press * once to return to Interval1 menu Shutdown
21. Press 6 two times for Stop Time menu Stop Time
22. Press 6, then enter Stop Time in 24-hr time (HH:MM) New Time *-Exit #-Save
23. Press # to save the time New Time *-Exit 6 -Edit
24. Press * two times to return to Shutdown Shutdown
25. Press 2, 3 or 4 to edit Intervals 2, 3 or 4 IntervalX
26. Press 9 for enable menu Enable (Current Setting) *-Exit 9-Edit
27. Press # to save the setting Lighting (New Setting) *-Exit 8-Edit
28. Press * five times to exit to Sales Mode 0.00