Seaga INF4B, Service And Parts Manual

Page: 29 / 77

29 Revision 2.EL950 1.3.1074C 18.6
ADVANCED*
A password is required to enter this menu. The factory default password is 2314. The following sub-menus
are available under this sub-menu:
• Beep Enable • Temp
• Optics Disables • Selection Style
• Motor Type
BEEP ENABLE
OPTICS DISABLES
MOTOR TYPE
STEP DISPLAY
1 Press Service Mode Button Motor Count or Error Code **
2 Press 4 for Configuration Configuration
3 Press 0 for Advanced Config Password: Use keypad to enter password
4 Press 1 for Beep Enable menu Beep Enable (Current Setting) *-Exit, no change 1-Edit
5 Press 1 to toggle ON/OFF Beep Enable (Choice Flashing) *-Exit, no change # to Save
6 Press # to save the setting Beep Enable (New Setting) *-Exit, no change 1-Edit
7 Press * three times to exit 0.00
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 4 for Configuration Configuration
3. Press 0 for Advanced Config Password: Use keypad to enter password
4. Press 2 for Optics Disables menu Optics Disables (Current Setting) *-Exit, no change 2-Edit
5. Press 2 to toggle ON/OFF Optics Disables (Choice Flashing) *-Exit, no change # to Save
6. Press # to save the setting Optics Disables (New Setting) *-Exit, no change 2-Edit
7. Press * three times to exit 0.00
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 4 for Configuration Configuration
3. Press 0 for Advanced Config Password: Use keypad to enter password
4. Press 3 for Motor Type menu Motor Type (Current Setting) *-Exit, no change 3-Edit
5. Press 3 to toggle 3-Wire or 2-Wire Motor Type (Choice Flashing) *-Exit, no change # to Save
6. Press # to save the setting Motor Type (New Setting) *-Exit, no change 3-Edit
7. Press * three times to exit 0.00