Section 05
ENGINE MANAGEMENT (DI)
Subsection 04
(DIAGNOSTIC PROCEDURES)
05-04-10
SMR2000-052-05-04A.FM
FAUL
T CODE
DI
A
GNOSED
CO
M
P
ONENT/
SE
NSOR/
CI
RCUI
T
EC
U
I
N
TE
R
N
A
L
NAME
FAU
L
T
DE
TECT
E
D
FAULT DE
TECT
E
D
W
H
IL
E EN
G
IN
E
RUNNI
NG
FAULT DE
TECT
E
D
W
H
IL
E EN
G
IN
E
NO
T
RUNNI
N
G
NO
RM
AL OPER
ATI
O
N
RESUM
E
S I
F
FA
ULT
RE
M
OV
E
D AND.
..
SERVICE ACTION
AND
POSSIBLE CAUSES
P0120
TPS, PTO
TPI_1
Sensor out
of range
Yes
No
Return to
idle
Service action:
Check for 5 volts on pin 1 and 0-0.5 volts on pin 3 and 0 volts on pin
2. Check system circuits 4-1, 4-2, 4-18. Check with throttle closed the
resistance between 1 and 2 is 2000 ohms and between 2 and 3 is
1000 ohms and between 1 and 3 2500 ohms. Check for linear resis-
tance rise when opening throttles. Check physical stops for wear.
Possible causes:
Damaged Sensor, damaged circuit wires, damaged connector,
damaged ECU pins, ECU failure, damaged or out of alignment throt-
tle bodies or sensor.
P0220
TPS, MAG
TPI_2
Sensor out
of range
Yes
No
Return to
idle
Service action:
Check for 5 volts on pin 1 and 4.75-5.0 volts on 3 and 0volts on pin 2.
Check system circuits 3-5, 3-10, 3-14. Check with throttle closed the
resistance between 1 and 2 is 2500 ohms and between 2 and 3 is
2500 ohms and between 1 and 3 1200 ohms. Check for linear resis-
tance rise when opening throttles. Check physical stops for wear.
Possible causes:
Damaged Sensor, damaged circuit wires, damaged connector,
damaged ECU pins, ECU failure, damaged or out of alignment throt-
tle bodies or sensor.
P1102 TPS,
PTO
TPI_1_ADAP
Throttle
position
adaption
failure
Yes
No
Full reset.
Key off
and on
Service action:
Check cable adjustment.
Check Idle stop for wear check throttle angles at idle.
Possible causes:
No initialisation after throttle body or ECU changes throttle idle
stop drifted.
P1103 TPS,
MAG
TPI_2_ADAP
Throttle
position
adaption
failure
Yes
No
Full reset.
Key off
and on
Service action:
Check cable adjustment. Check Idle stop for wear. Check throttle
angles at idle.
Possible causes:
No initialisation after throttle body or ECU changes throttle idle.
Stop drifted.
P0116
WTS
COOL_SENS
Sensor out
of range
Yes
No
Return to
idle
Service action:
Check for resistance approx. 2280 ohms to 2736 ohms at temperature
of 19 to 21°C (66° to 70°F) between system circuits 4-9 and 4-11.
Possible causes:
Damaged sensor, damaged circuit wires, damaged connector,
damaged ECU pins. ECU failure.
P0217
WTS
COOL_RED
Overheat
warning
Yes
No
As soon as
fault is not
present
Service action:
Check for debris or blockage in cooling system. Check for resistance
approx. 2280 ohms to 2736 ohms at temperature of 19 to 21°C (66°
to 70°F) between system circuits 4-9 and 4-11.
Possible causes:
Engine overheated, damaged sensor.
P0110
MATS
MCT_SENS
Sensor out
of range
Yes
No
Return to
idle
Service action:
Check for resistance approx. 2280 ohms to 2736 ohms at temperature
of 19 to 21°C (66° to 70°F) between system circuits 4-16 and 4-19.
Possible causes:
Damaged sensor, damaged circuit wires, damaged connector,
damaged ECU pins. ECU failure.
www.SeaDooManuals.net
Summary of Contents for 2001 RX
