Section 07
FUEL SYSTEM
Subsection 04
(CARBURETOR)
SMR2000-057_07_04A.FM
07-04-9
THROTTLE CABLE ASSEMBLY
1. Sensor
2. Throttle lever section
3. Carburetor section
4. Oil pump section
NOTE:
Always perform the throttle cable adjust-
ment in the specified order, as described in follow-
ing procedure.
Unscrew idle adjustment screw to obtain a small
gap between stopper and screw.
1. Idle speed screw
Ensure throttle plates are completely closed on
both carburetors.
Loosen jam nut and turn adjustment nut to elimi-
nate all the slack in the throttle cable between sen-
sor and carburetor.
Tighten jam nut.
1. Throttle cable
2. Adjustment nut
3. Jam nut
Turn idle adjustment screw clockwise until it comes
in contact with stopper. Refer to LOW SPEED
SCREW ADJUSTMENT section for the proper ad-
justment.
Adjust oil pump cable. Refer to OIL INJECTION
PUMP.
NOTE:
It is important to adjust oil pump cable prior
to finalize adjustment of throttle cable.
CAUTION:
Improper oil injection pump syn-
chronization with carburetor throttle opening
can cause serious engine damage.
Adjust throttle cable to obtain proper lever position
at full throttle.
Turn adjuster knob as required to obtain proper
throttle lever adjustment.
2
F08F0CA
1
3
4
F06F0KA
1
F02F20A
1
2
3
www.SeaDooManuals.net
Summary of Contents for 2001 RX
