Section 05
ENGINE MANAGEMENT (DI)
Subsection 03
(COMPONENT INSPECTION AND ADJUSTMENT)
SMR2000-051-05-03A.FM
05-03-5
NOTE:
In the following illustrations, the lower link
plate has been removed for clarity purposes only.
It does not have to be removed to perform the
adjustment.
Loosen lock nut of idle set screw.
Unscrew idle set screw so that
master
throttle
plate completely closes in the throttle body. En-
sure screw end clears the lever stopper.
1. Unscrew until
master
throttle plate is fully closed in throttle body
2. Unscrew here
3. Gap here
Remove synchronizing screw. Install a new one
and screw in making sure to keep
slave
throttle
plate completely closed in the throttle body (en-
sure to properly reinstall the spring). Ensure screw
end clears the lever stopper.
TURN SYNCHRONIZING SCREW CLOCKWISE AND KEEP SLAVE
THROTTLE PLATE FULLY CLOSED IN THE THROTTLE BODY
1. Screw here
2. Gap here
Master TPS
Using an ohmmeter, measure resistance between
pins 2 and 3.
Turn
idle set screw
clockwise until ohmmeter
reading changes by 175
± 20
Ω
.
Tighten lock nut.
Slave TPS
Measure resistance between pins 2 and 3.
Turn
synchronizing screw
clockwise until reading
changes by 175 ± 20
Ω
.
Ensure spring is still well positioned on stoppers.
Properly reinstall the plastic cap to the synchroni-
zation screw.
WARNING
Ensure to use a new screw which is coated
with the proper threadlocker to avoid further
loosening. Do not use the removed screw
even if you would apply any threadlocker. The
threadlocker may leak off the screw and onto
the throttle mechanism and cause the throttle
to stick.
2
F12R0YA
1
3
WARNING
Do not apply any threadlocker to the screw
threads. The threadlocker may leak off the
screw and onto the throttle mechanism and
cause the throttle to stick.
1
F12R0ZA
2
www.SeaDooManuals.net
Summary of Contents for 2001 RX
