HotFind-D Infrared Camera Operation Manual
30
spot will automatically track the highest temperature, and so “SP_1”
displays the highest temperature value. If the temperature exceeds
preset temperature, the camera will buzz itself. Other spots can be
moved with the direction keys to realize the full screen multi-spot
temperature measurement.
5.5.3 Isothermal Analysis
(
1
)
Analysis Setup
Setup the “Isotherm type”, “Isotherm width” and “Isotherm color” of
“Setup-analysis” under Setup menu.
(
2
)
Analysis Operations
Select “Isotherm” under Analysis menu, press menu(enter) key, SDS
HotFind-D will display the image within a certain temperature range in
one color basing on the isotherm mode set by the user.
(
3
)
Move the Isothermal Area and Change its Size
In Isothermal Analysis mode, press the key “
△
,
+
”and“ ”respectively to
change the temperature median of the isothermal interval, and press the
key “
” and “ ”
respectively to change the scope of the isothermal
interval.
5.6 Storage of image and Pseudo-color switch
(
1
)
Store image
After adjusting an image, select “Save” under File menu, and press
menu(enter) key. Then SDS HotFind-D will save the current image to the
Flash Disk. (Note: this can be performed in both freeze and live status.)
The method of SDS HotFind-D image storage is to create a folder in
the Flash Disk and save the image to the folder, the directory is named
based on the date as below.
Summary of Contents for HotFind-D
Page 2: ......