SDS HotFind-D, Operation Manual

Page: 15 / 51

HotFind-D Infrared Camera Operation Manual
12
menu. Press the Menu(enter) key to enter the selection.
After startup, press the Menu key
②
to pop up a pull-down menu.
Press this key when selecting an option, and a sub-menu will be
displayed if there is any, or to enter the selection if there is no sub-menu.
Direction keys “ ”
，
“ ”
，
“
△
,
+
” and “ ”
The keys “ ” ， “ ” ， “
△
,
+
” and “ ” are the keys Left, Right, Up
and Down in turn. They are used to select the options of the menu, to
move the spots, lines and areas in Analysis mode, to select and set the
parameters in Parameter Setup mode, to zoom in or out the analyzed
area in Area Analysis mode in Non-Menu mode. (Detailed operation
instructions referred to Chapter 5).
On Menu mode, press the key “ ”(right), a pull-down menu will be
displayed. Use the keys “
△
,
+
” and “ ”(up and down) to select the
options on the menu; and the keys “
△
,
+
” and“ ”(up and down) to set the
value of the selected items.
In addition, in Non-Menu mode, besides the key “A”, which can
automatically adjust Level and Span, the user may also use the Direction
key to manually adjust Level and Span. “
△
,
+
”or“ ”to adjust Span, and
“ ” or “ ” to adjust Level.
4.2 Brief Introduction
Here is for introducing the common use of HotFind-D.
4.2.1 Observation and adjustment of Infrared Image
1. Press and hold on the power switch key to turn on the camera;
2. Wait till the initialization and data loading completely;
3. Take off the cover of lens and point to the target;
4. Whirl the lens for focusing;
5. Press key “A” to auto-adjustment.