HotFind-D Infrared Camera Operation Manual
35
z
Connect the rear power cord of the charger to the electrical outlet.
The charger will automatically shift between 100-240V AV voltage.
When the power light is on, it indicates the charger is now ready.
z
Put the battery into the charger.
6.3 Additional Information of the Battery System
z
Heat will be produced while charging.
z
Over-charging might not damage to a full battery, but it is still
recommended that the charging time shall not exceed 20 hours.
z
A new lithium cell will reach the full capacity after 5 charges.
z
Generally speaking, the battery status is full before shipping.
z
It is not required to fully discharge the lithium cells as they do not
produce the memory effect as cadmium nickel cells.
6.4
Cautions of Using the Battery
z
There will be explosive risk due to improper battery replacing.
z
Only the alternatives of the same or equivalent types
recommended by the manufacturer are allowed to use.
z
The used up batteries must be disposed as instructed by the
manufacturer.
6.5
Notice of external power supply
z
When using the infrared camera, the camera will shut down
automatically due to the power of battery is empty. If the user want
to connect the camera to the external power supply, the battery of
the camera must be take away first otherwise the camera cannot
startup because of the protection system.
Summary of Contents for HotFind-D
Page 2: ......
