manualshive.com logo in svg

Sculpt AXIS EPI950, Installation & User Manual

Share
Download
Sculpt AXIS EPI950 Installation & User Manual Download Page 52

52

TEST REPORTS

9. TEST RESULTS

TESTING LABORATORY
MANUFACTURER
MODEL

ISSUE DATE

INVESTIGATING OFFICE
RESULTS

CONCLUSION 

HRL Technology 

AXIS

H1200, H1200DS, H1400, H1600, H1600DS, H1600XXL, H1600XXLDS, 

H1200 3V, H1200VLD, H1200VLG, EPI950

18.11.2015

Steve Marland

We have examined the H1200, H1200DS, H1400, H1600, H1600DS, 

H1600XXL, H1600XXLDS, H1200 3V, H1200VLD, H1200VLG and EPI950 

ducted appliances. The firebox volumes are larger than the tested H1200 

ducted appliance.

Since the H1200 complies with the requirements of AS/NZS4013: 2014 

clause 1.2.3 (b), (maximum heat output greater than 25kW (30kW) as 

tested and is intended for space heating by means of transferring heat 

to the living area by ducted hot air), than the H1200DS, H1400, H1600, 

H1600DS, H1600XXL, H1600XXLDS, H1200 3V, H1200VLD, H1200VLG 

and EPI950 ducted appliances are expected to give a higher output.

H1200/DS | H1400 | H1600/DS | H1600XXL/DS | H1200 3V | H1200VLG/D | EPI950 

DUCTED HEAT TRANSFER APPLIANCE TEST

Summary of Contents for AXIS EPI950


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands